Specifications

Projecting and single sided illuminated circular signs

1. All UK manufactured
2. All Welded aluminium construction – no corrosion problems – rings used to hold acrylic also aluminium – paint finish on ringts and sign carcass identical
3. Wall plate to sign case – distance 100mm
4. Wall plate = 6 mm aluminium
5. Wall plate welded to stand off tube and welded to sign carcass – no screws to work loose etc

Traditional scroll work hanging brackets

1. All UK manufactured
2. All hot dip galvanised. This process ensures that no corrosion will occur on our brackets for many years. We offer a 7 year corrosion guarantee (See terms)
3. Except for the scroll work all components laser cut

Fitting Instructions

We include these for the benefit of people new to the sign industry. When fitting our circular projecting signs, and for that matter our fascia mounted single sided circular signs, put a small piece of double sided tape on each of the acrylic panels. This is to prevent the possibility of panel spin caused by the wind. The acrylic panels need to be fitted slightly loose to allow for expansion/contraction of the acrylic. Fit with the electrics at the top of the unit.